Version: 2023.2

4.3. Conditional Obfuscation

Conditional obfuscation is an extension feature to indirect declarative obfuscation.

4.3.1. Types

Conditional obfuscation allows to process the types in bulk according to their natural properties such as visibility (public, internal, protected, private), subtype (class, struct, enum, delegate), and others.

This functionality is achieved by when conditional clause, which can be specified in an obfuscation attribute. So the full conditional attribute notation has the following form:

[assembly: Obfuscation(Feature = "apply to type [name mask] when [condition]: [feature]")]

where [name mask] is a glob mask for the type name and [condition] is a string defining the condition for a match.

Condition is defined as a boolean predicate with Pascal syntax. A quick example of a conditional attribute is shown below.

Example 4.8. Indirectly disable renaming of all internal enums and their members

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when internal and enum: renaming", Exclude = true, ApplyToMembers = true)]

Please take a closer look at internal and enum predicate in the sample above. What it says is this: the result of predicate is true when internal variable equals to true and enum variable equals to true too; otherwise the result of predicate is false. The values of internal and enum variables are calculated for every type in the assembly, describing the natural properties of a CLR type in boolean form.

The list of available variables is presented in the table below.

Table 4.1. The list of available variables for conditional obfuscation of types

Variable	Description
abstract	`true` if the type is abstract; otherwise, `false`
anonymous	`true` if the type is anonymous; otherwise, `false`
class	`true` if the type is a class or a record; otherwise, `false`
closure	`true` if the type is a container synthesized to hold captured variables for closures; otherwise, `false`
compiler-generated	`true` if the type is generated by a compiler; otherwise, `false`
delegate	`true` if the type is a delegate; otherwise, `false`
enum	`true` if the type is an enumeration; otherwise, `false`
generic	`true` if the type is generic; otherwise, `false`
interface	`true` if the type is an interface; otherwise, `false`
internal	`true` if the type is internal; otherwise, `false`
nested	`true` if the type is nested; otherwise, `false`
obfuscator-generated	`true` if the type is generated by an obfuscator; otherwise, `false`
private	`true` if the type is private; otherwise, `false`. Applies to nested types only; `false` if the type is not nested
protected	`true` if the type is protected; otherwise, `false`. Applies to nested types only; `false` if the type is not nested
public	`true` if the type is public; otherwise, `false`
record	`true` if the type is a record; otherwise, `false`
sealed	`true` if the type is sealed; otherwise, `false`
serializable	`true` if the type is serializable; otherwise, `false`
static	`true` if the type is static; otherwise, `false`
struct	`true` if the type is a structure; otherwise, `false`

Predefined constants can be used in expressions as well. The list of available constants is presented in the table below.

Table 4.2. The list of available constants for conditional obfuscation

Constant	Description
false	`false` value
true	`true` value

Built-in functions can be used in expressions too. The list of available functions is presented in the table below.

Table 4.3. Built-in functions for conditional obfuscation

Function	Description
`inherits('type-name')`	Returns `true` if the type inherits another type specified by `type-name` parameter; otherwise, `false`. `Inherits` function considers base and all inherited types including interfaces. Type name parameter can contain either the full type name or a mask for a bulk match
`extends('type-name')`	Returns `true` if the type extends another type specified by `type-name` parameter; otherwise, `false`. `Extends` function only checks the base type, but all implemented and inherited interfaces are considered. Type name parameter can contain either the full type name or a mask for a bulk match
`has-attribute('type-name')`	Returns `true` if the type or member has a custom attribute specified by `type-name` parameter; otherwise, `false`. Type name parameter can contain either the full type name or a mask for a bulk match. Example: `has-attribute('System.ComponentModel.DisplayNameAttribute')`
`matches('name-mask')`	Returns `true` if the type or member name matches a mask specified by the parameter; otherwise, `false`.

Variables, functions and constants can be combined by operators. They have the standard Pascal precedence. The list of available operators is presented in the table below.

Table 4.4. The list of available operators for conditional obfuscation

Operator	Description	Priority
not	Unary operator for boolean negation	Highest
and	Binary operator for boolean `and` operation	Medium
or	Binary operator for boolean `or` operation	Lower
=	Binary operator for boolean `equal` operation	Lowest
	Binary operator for boolean `not equal` operation	Lowest

The precedence of operations can be changed by parentheses.

Let's take a look at examples.

Example 4.9. Disable renaming of all types except enums

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when not enum: renaming", Exclude = true)]

Example 4.10. Disable renaming of all internal nested and serializable types together with their members

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when internal and (nested or serializable): renaming", Exclude = true, ApplyToMembers = true)]

Example 4.11. Disable renaming of all types except internal nested and serializable types

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when not (internal and (nested or serializable)): renaming", Exclude = true)]

Example 4.12. Disable renaming of all interfaces in Contoso.Core.Services namespace

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type Contoso.Core.Services.* when interface: renaming", Exclude = true)]

Example 4.13. Disable renaming of all classes derived from System.IDisposable interface. Renaming of members for matched classes is disabled too

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when class and extends('System.IDisposable'): renaming", Exclude = true, ApplyToMembers = true)]

As you can see, the conditions can have any complexity and can be freely defined to achieve your specific goals.

4.3.2. Type Members

It was described how to tune the obfuscation of types in a bulk way in the section above. But what about type members such as methods, fields, properties, and others? Sometimes it may be beneficial to process them in a bulk way too.

The declarative attribute for conditional obfuscation of type members has the following form:

using System.Reflection;

[Obfuscation(Feature = "apply to member [name mask] when [condition]: [feature]")]
class Sample1
{
  …
}

[name mask] is a glob mask which selects the members according to their names. [condition] allows to specify a boolean predicate to select members according to their properties. The rules are all the same as for types; the only difference is a set of variables which can be used in a boolean predicate. The list of available variables is presented below.

Table 4.5. The list of available variables for conditional obfuscation of type members

Variable	Description
abstract	`true` if the member is abstract; otherwise, `false`
compiler-generated	`true` if the member is generated by a compiler; otherwise, `false`
const	`true` if the member defines a literal constant; otherwise, `false`. Applies to fields only; `false` if the member is not a field
constructor	`true` if the member is a constructor; otherwise, `false`
event	`true` if the member is an event; otherwise, `false`
field	`true` if the member is a field; otherwise, `false`
generic	`true` if the member is generic; otherwise, `false`. Applies to methods only; `false` if the member is not a method
internal	`true` if the member is internal; otherwise, `false`
method	`true` if the member is a method; otherwise, `false`
obfuscator-generated	`true` if the member is generated by an obfuscator; otherwise, `false`
private	`true` if the member is private; otherwise, `false`
property	`true` if the member is a property; otherwise, `false`
protected	`true` if the member is protected; otherwise, `false`
public	`true` if the member is public; otherwise, `false`
readonly	`true` if the member is read-only; otherwise, `false`. Applies to fields and properties only; `false` if the member is neither a field nor a property
static	`true` if the member is static; otherwise, `false`
virtual	`true` if the member is virtual; otherwise, `false`

The information on this topic is extremely bare, so let's take a relaxed look at some real-life samples.

Example 4.14. Disable renaming of public properties

using System.Reflection;

[Obfuscation(Feature = "apply to member * when property and public: renaming", Exclude = true)]
class ImageQualityService
{
  …
}

Example 4.15. Disable renaming of all methods

using System.Reflection;

[Obfuscation(Feature = "apply to member * when method: renaming", Exclude = true)]
class CellCallEngine
{
  …
}

Example 4.16. Disable renaming of internal fields

using System.Reflection;

[Obfuscation(Feature = "apply to member * when field and internal: renaming", Exclude = true)]
class ContosoHeadquarters
{
  …
}

4.3.3. Options are Combinable

Conditional obfuscation of types and type members can be easily combined to achieve specific goals in an elegant and powerful way.

Just take a look at the samples below.

Example 4.17. Disable renaming of property Contoso in type Acme.Services

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type Acme.Services: apply to member Contoso when property: renaming", Exclude = true)]

Example 4.18. Disable renaming of all public properties in all types

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type *: apply to member * when public and property: renaming", Exclude = true)]

Example 4.19. Disable renaming of all public properties in types defined in MyNamespace

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type MyNamespace.*: apply to member * when public and property: renaming", Exclude = true)]

Example 4.20. Disable renaming of all internal events in all public types

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when public: apply to member * when event and internal: renaming", Exclude = true)]

4.3.4. Diagnostics

How to know which types and members conditional obfuscation applies to?

Sometimes it may be useful to get the full list of types and members targeted by a specific conditional obfuscation directive. To achieve that, you can use the log feature as shown below:

Example 4.21. Log all members targeted by a conditional obfuscation directive

using System.Reflection;

[assembly: Obfuscation(Feature = "apply to type * when public: apply to member *: log")]

Note

Logging does not affect obfuscation in any way. It just dumps the list of the targeted items to the Eazfuscator.NET's log.

4.3.1. Types​

4.3.2. Type Members​

4.3.3. Options are Combinable​

4.3.4. Diagnostics​

How to know which types and members conditional obfuscation applies to?​

4.3.1. Types

4.3.2. Type Members

4.3.3. Options are Combinable

4.3.4. Diagnostics

How to know which types and members conditional obfuscation applies to?